Conveyor Belting

Heavy Duty Welded Selvage Belting

Heavy duty belts are approximately 2.5 times stronger than standard duty belts.


H1 - 1" x 1" Mesh, Welded Selvage

H2 - ½" x 1" Mesh, Welded Selvage

H3 - ½" x 1" Modified Mesh, Welded Selvage

WELDED SELVAGE BELT SPECIFICATIONS

  Width Max. Tension Approx. Wgt.
Design Mesh Min Max (Lbs./Ft. of Width)1 (Lbs./Sq. Ft.)
H1 1" x 1" 3" 192" 1350 3.50
H2 ½" x 1" 4" 192" 1750 3.90
H3 ½" x 1 Modified 6" 192" 1750 4.85
NNH3 ½" x 1 Modified 6" 192" 2000 5.00

HEAVY DUTY BELT DIMENSIONS:
• Flat strip = 1/2" wide x .062" thick, round edge    • Connector rod = 6 gauge (.192" diameter), high tensile strength

(1) Maximum working tension per foot of belt width given for drum driven applications only. See page 9 for sprocket drive information.

Materials Available

  • Low carbon galvanized steel
  • C1050 high carbon steel
  • T-304 stainless steel
  • T-316 stainless steel
  • T-201 stainless steel

Features

  • Mesh available in three (3) different sizes.
  • Widths available ranging from 3" to 192".
  • Fabricated using a round edge flat strip.
  • Belts wider than 24" are supplied with internal welds.
  • Belts 24" and under can be supplied with internal welds by request at no additional cost.

Sprockets

  • May be placed in the first opening on either side of the belt.

Conveyor Belting                

Flights/Attachments  

Sprockets    

TruKey® Shafting     

-Standard Duty Clinched Selvage Belting
-Standard Duty Welded Selvage Belting
-Heavy Duty Welded Selvage Belting
-Heavy Duty Clinched Selvage Belting
-Key-Turn Heavy Duty Radius Belting
-Flights / Attachments -Overview
-T-Series Machined
-S-Series
-H-Series
-Sprocket Material
-Overview
-Material Specifications
-Tolerances
-Sizes and Materials
-Square Shafts & Turned Ends
How To Order Manufacturing Representatives Technical Information Request a Quote